鋼制閘門主要用于給排水、水電、水利工程中，用以截止、疏通水流或調節水位。本廠綜合國內外先進結構及工藝，對閘門已做了多次改進，形成批量生產，多種規格出口遠銷。   鋼制閘門特點：
Steel gates are mainly used in water supply and drainage, hydropower, and hydraulic engineering to cut off, dredge water flow, or regulate water levels. Our factory has made multiple improvements to the gate by integrating advanced structures and processes both domestically and internationally, forming mass production and exporting various specifications for distant sales. Characteristics of steel gates:
1、結構強、耐腐、耐磨、安裝方便。
1. Strong structure, corrosion resistance, wear resistance, and easy installation.
2、密封性能好，滲水量：正方向0.72(L/min.m)、反向(L/min.m)。   3.品種全、適應性廣。
2. Good sealing performance, water seepage rate: 0.72 (L/min. m) in the positive direction and 0.72 (L/min. m) in the reverse direction. 3. Complete variety and wide adaptability.
鋼制閘門安裝前的準備： 1、 查看發貨清單，清點貨物數量及緊固件、備件等數量是否與清單一致，同時做好貨物的保管工作。未安裝前門體必須水平放置，防止門體變形而影響止水效果，同時絲桿以及聯接桿不可受力彎曲。 2、查看安裝資料(如安裝圖、合格證、使用說明書等)是否齊全。 3、對設備在運輸過程中的變形及損壞要進行全面的檢查和修復。4、檢查土建尺寸、預埋件及預留孔等是否符合要求。 5、安裝工作人員應全部到場，并準備好安裝時必需的設備(如：吊車、焊機、腳手架等)、安裝工具及測量工具等。
Preparation before installation of steel gates: 1. Check the shipping list, count the quantity of goods, fasteners, spare parts, etc., and ensure that they are consistent with the list. At the same time, take good care of the goods. If the front door body is not installed, it must be placed horizontally to prevent deformation of the door body and affect the sealing effect. At the same time, the screw rod and connecting rod cannot be bent under force. 2. Check if the installation documents (such as installation drawings, certificate of conformity, user manual, etc.) are complete. 3. A comprehensive inspection and repair should be conducted on the deformation and damage of the equipment during transportation. 4. Check if the civil dimensions, embedded parts, and reserved holes meet the requirements. 5. All installation personnel should be present and prepare necessary equipment (such as cranes, welding machines, scaffolding, etc.), installation tools, and measurement tools for installation