What conditions should be met for steel gate opening and closing force detection?
鋼閘門啟閉力檢測應該滿足什么條件?

1 The structure of the door slot is in good condition, and there is no foreign matter stuck in the door slot.
1 門槽結構情況良好,門槽內無異物卡阻.

2 The whole gate has no deformation affecting the operation.
2 閘門整體無影響運行的變形.

3. The bearing device and hinge device of the gate can work normally.
3 閘門的支承裝置,支鉸裝置能正常工作.

4 Hoist hoist and gate are connected reliably, hoisting hoist (including door hoist and trolley hoist, the same below) wire rope is wound correctly on the drum and pulley, the rope end is fixed firmly, the wire rope must be safe and reliable.
4 啟閉機吊具與閘門連接可靠,卷揚式啟閉機(含門機和臺車式啟閉機,下同)鋼絲繩在卷筒和滑輪上纏繞正確,繩端固定牢固,鋼絲繩必須安全可靠.

5 Double lifting gate should meet the synchronization requirements.
5 雙吊點閘門應滿足同步要求.

6 There is no debris affecting the operation on both sides of the track within the full travel range of the mobile hoist, and the brake action is correct and reliable.
6 移動式啟閉機全行程范圍內的軌道兩旁無影響運行的雜物,制動器動作正確,可靠.